Skip to main content
This guide provides step-by-step instructions for installing and configuring PADS4 Viewer on the IAdea WRP-1000 (Android 9) device.

​
1. First-Time Use

Before installation, ensure that the PADS4 Server is set up and configured properly.
The minimum PADS4 Server version required is PADS4 Foundation 2023.1.

​
1.1 Resetting the Device

If the device was used previously, perform a factory reset to clear storage and prevent software conflicts.
1

Step One

Open IAdea Basic Settings.
2

Step Two

Click on Advanced.
3

Step Three

Select System → Factory Default.
4

Step Four

Click OK to confirm the factory reset.
After resetting, the Basic Settings screen will appear.

​
1.2 Checking Device Firmware

To ensure full PADS4 Viewer compatibility, verify that the device is running firmware version 3.4.1 or higher.
1

Step One

Open IAdea Basic Settings.
2

Step Two

Click on Advanced.
3

Step Three

Select Information.
4

Step Four

The Firmware Version is displayed on the right-hand side of the screen.

​
1.3 Updating Firmware

If the firmware is outdated, update it by following these steps:
1

Step One

Open IAdea Basic Settings.
2

Step Two

Click on Advanced.
3

Step Three

Select System → Firmware Update.
4

Step Four

Click on Check Latest Firmware from Internet.
5

Step Five

If a new firmware version is available, select Update from Internet.

​
2. Installing PADS4 Viewer

Follow the steps below to install and configure PADS4 Viewer on the IAdea WRP-1000.

​
2.1 Installing PADS4IAdea from USB Stick

The PADS4IAdea.apk file is available on the PADS4 Server at: 
https://[yourPADS4Server]/[domain]/apps
Alternatively, download the latest version from here and place it in the PADS4 Server apps directory.

​
Installation Steps

1

Step One

Copy the PADS4IAdea.apk onto a USB stick.
2

Step Two

Insert the USB stick into the IAdea WRP-1000 device.
3

Step Three

Open IAdea Basic Settings.
4

Step Four

Click on Advanced.
5

Step Five

Click three times in the lower right corner of the Advanced menu to access Android.
6

Step Six

The Android Home Screen will now be visible.
7

Step Seven

Open the Files app.
8

Step Eight

Select USB Disk and click on PADS4IAdea.apk.
9

Step Nine

Click CONTINUE in the confirmation dialog.
10

Step Ten

Click INSTALL when prompted.
11

Step Eleven

Once installed, click DONE.

​
3. Configuring PADS4 Viewer

​
3.1 Setting Automatic Start

1

Step One

Open IAdea Basic Settings.
2

Step Two

Click on Advanced.
3

Step Three

Select Content → AppStart.
4

Step Four

Click (+)Advanced.
5

Step Five

In Package Name, enter:
com.pads4.viewer.iadea
6

Step Six

Click Set to save the setting.

​
3.2 Connecting to PADS4 Server

PADS4 Server Address Format: 
protocol://host:port/hostpath/
  • Protocol: http or https (depends on SSL certificate).
  • Host: DNS name or IP address of PADS4 Server.
  • Port: (Optional - specify only if using non-default ports).
  • Host Path: Configured in System Management (default: PADS4).

​
Connection Steps

1

Step One

Enter the PADS4 Server Location.
2

Step Two - *Optional*

Specify a Viewer Name (if left blank, PADS4 will generate one).
3

Step Three

Press Start.
4

Step Four

Grant permission to access media and files when prompted.
5

Step Five

The PADS4 Viewer will be downloaded and installed.

​
4. Updating PADS4 Viewer

The PADS4 Viewer will automatically update when the PADS4 Server is updated.

​
5. Supported Features & Capabilities

FeatureDescription
✅Automatic Software Updates – Updates when the PADS4 Server updates.
✅Offline Mode – The device continues running presentations for 7 days while offline.
✅HTTP & HTTPS Support
✅Streaming Video – HTTPS & HLS supported.
✅Maximum 2 FHD Videos Simultaneously
✅PowerPoint & PDF Elements – (PowerPoint requires installation on PADS4 Server).
✅Device Management – Remote control via PADS4 CTRL Center & PADS4 Agent.
✅Reboot & Restart Viewer – Supported.
❌Wake-on-LAN – Not supported.
✅Proof of Play Tracking – Monitors content playback history.