XDS Series

This guide provides step-by-step instructions for installing and configuring PADS4 Viewer on the IAdea XDS Series (Android 7.1) devices, including:

• XDS-XX22 (A/H)
• XDS-1078
• XDS-1088 (A/H)
• XDS-1588 (A/H)

---

1. First-Time Use

Before installation, ensure that the PADS4 Server is set up and configured properly.

The minimum PADS4 Server version required is PADS4 Foundation 2021.3.

---

1.1 Prerequisites

Before installing PADS4IAdea on the XDS Series, ensure that the following conditions are met:

• Android version: 7.1
• Firmware version: 2.2.3
• The device is connected to a network

---

1.2 Resetting the Device

If the device was used previously, perform a factory reset to clear storage and prevent software conflicts.

1. Step One

   Open IAdea Basic Settings.

2. Step Two

   Click on Advanced.

3. Step Three

   Select System → Factory Default.

4. Step Four

   Press OK to confirm the factory reset.

After resetting, the Basic Settings screen will appear.

---

2. Installing PADS4 Viewer

Follow the steps below to install and configure PADS4 Viewer on the IAdea XDS Series.

---

2.1 Checking Device Firmware

To ensure full PADS4 Viewer compatibility, verify that the device is running firmware version 2.2.3.

1. Step One

   Open IAdea Basic Settings.

2. Step Two

   Click on Advanced.

3. Step Three

   Select Information.

4. Step Four

   The Firmware Version is displayed on the right-hand side of the screen.

---

2.2 Updating Device Firmware

To update the firmware, follow the instructions provided by IAdea:

• Download firmware updates from: IAdea Support Page.

---

2.3 Installing PADS4IAdea from USB Stick

The PADS4IAdea.apk file is available on the PADS4 Server at:

C:\Program Files\PADS4\Foundation\Apps

Alternatively, download the latest version from here and place it in the PADS4 Server apps directory.

Installation Steps

1. Step One

   Copy the PADS4IAdea.apk onto a USB stick.

2. Step Two

   Insert the USB stick into the IAdea XDS Series device.

3. Step Three

   Open IAdea Basic Settings.

4. Step Four

   Click on Advanced.

5. Step Five

   Click three times in the lower right corner of the Advanced menu to access Android.

6. Step Six

   The Android Home Screen will now be visible.

7. Step Seven

   Open the File Manager app.

8. Step Eight

   Select USB and click on PADS4IAdea.apk.

9. Step Nine

   If prompted about unknown sources, enable the setting in Security Settings and return to the File Manager.

10. Step Ten

    Press Install, then Open when the installation is complete.

---

2.4 Configuring PADS4IAdea for Automatic Start

1. Step One

   Open the PADS4IAdea app and click on System Setting.

2. Step Two

   Click on Advanced.

3. Step Three

   Select Content → AppStart.

4. Step Four

   Open the Advanced Sub Menu.

5. Step Five

   In Package Name, enter:

   com.pads4.viewer.iadea  
   
6. Step Six

   Click Set to save the setting.

---

2.5 Connecting to PADS4 Server

PADS4 Server Address Format:

protocol://host:port/hostpath/  

• Protocol: http or https (depends on SSL certificate).
• Host: DNS name or IP address of PADS4 Server.
• Port: (Optional - specify only if using non-default ports).
• Host Path: Configured in System Management (default: PADS4).

Connection Steps

1. Step One

   Enter the PADS4 Server Location.

2. Step Two - *Optional*

   Specify a Viewer Name (if left blank, PADS4 will generate one).

3. Step Three

   Press Start.

4. Step Four

   Grant permission to access media and files when prompted.

5. Step Five

   The PADS4 Viewer will be downloaded and installed.

---

3. Supported Features & Limitations

Feature	Description
✅	Automatic Software Updates – Updates when the PADS4 Server updates.
✅	Offline Mode – The device continues running presentations for 7 days while offline.
✅	Supports HTTP & HTTPS
✅	Maximum 2 Videos Per Page
✅	Cluster Viewer Mode – Supported.
✅	Interactive Button, Text, Scrolling Text, Image, Table
✅	PowerPoint & PDF Elements – (PowerPoint requires installation on PADS4 Server).
✅	Device Management – Remote control via PADS4 CTRL Center & PADS4 Agent.
✅	Reboot & Restart Viewer – Supported.
❌	Wake-on-LAN – Not supported.
✅	Proof of Play Tracking – Monitors content playback history.

---

4. Troubleshooting

Problem	Solution
Browser is not running full screen	Check firmware version – may be incompatible.
Device fails to connect via Ethernet	Updating firmware may resolve the issue.
Navigation bar is visible	Updating firmware may fix this.
Repeated permission prompts for file storage	Check firmware version – may be incompatible.