Skip to main content
This guide provides step-by-step instructions for installing and configuring PADS4 Viewer on Philips T-line (10BDL4551T) displays.

​
1. First-Time Use

Before installation, ensure that the PADS4 Server is set up and configured properly. 📌 Minimum PADS4 Server version required: PADS4 Foundation 2021.2 When turning on the device for the first time, the Configuration Wizard will appear. If not, reset the device as described in 1.2 Resetting the Device.

​
1.1 Configuring the Device

1

Step One

On the Welcome Screen, select your preferred language and click Start.
2

Step Two

On the Security Settings screen, ensure SICP Network Port is enabled. (Other settings can be enabled or disabled as required.)
3

Step Three

On the Signage Display Settings screen, press Skip.
4

Step Four

On the Network Settings screen, select and configure the network type.
5

Step Five

On the Clone Media Files screen, press Skip.
6

Step Six

Press Finish to complete the setup.
The device will display Philips Media Player App.

​
1.2 Resetting the Device

If the device was previously used, perform a factory reset to clear storage and prevent software conflicts.
1

Step One

Open the Android Menu by pressing Home and then the Volume Down button behind the display.
2

Step Two

Enter the Admin Password (Default: 1234).
3

Step Three

Open Settings.
4

Step Four

Select Signage Display → System Tools → Factory Reset.
5

Step Five

Click on Factory Reset and confirm by pressing OK.
After resetting, the Welcome Screen will appear. Follow the steps in 1.1 Configuring the Device.

​
2. Installing PADS4 Viewer

Follow these steps to install the PADS4 Viewer on Philips T-line (10BDL4551T).

​
2.1 Checking Device Firmware

Ensure the correct firmware version is installed for full PADS4 Viewer functionality.
1

Step One

Open the Android Menu by pressing Home + Volume Down.
2

Step Two

Enter the Admin Password (Default: 1234).
3

Step Three

Open Settings.
4

Step Four

Select About.
5

Step Five

Ensure the Build Number is FB01.03T (required for PADS4).

​
2.2 Updating Device Firmware

To update the firmware, follow the Philips instructions: 📌 Firmware update guide: Download Firmware Instructions
📌 Philips Download Center: Download Center

​
2.3 Installing PADS4Philips from USB Stick

The PADS4Philips.apk file can be found on the PADS4 Server in: 
C:\Program Files\PADS4\Foundation\Apps
Alternatively, download the latest version from this link and place it in the apps directory on the PADS4 Server.

​
Installation Steps

1

Step One

Copy the PADS4Philips.apk file onto a USB stick.
2

Step Two

Insert the USB stick into the Philips T-line device.
3

Step Three

Open the Android Menu by pressing Home + Volume Down.
4

Step Four

Enter the Admin Password (Default: 1234).
5

Step Five

Select Storage → USB Drive and open PADS4Philips.apk.
6

Step Six

Select Install and then Open the app.

​
3. Supported Features & Limitations

FeatureDescription
✅Automatic Software Updates – PADS4 Viewer updates automatically.
✅Offline Mode – Device continues running presentations for 7 days while offline.
✅Supports HTTP & HTTPS
✅Maximum 2 Videos per Page
✅Streaming Support – HTTP.
✅Cluster Viewer Mode – Supported.
✅Interactive Button, Text, Scrolling Text, Image, Table
✅PowerPoint & PDF Elements – (PowerPoint requires installation on PADS4 Server).
✅Remote Device Management – Controlled via PADS4 Agent.
❌Wake-on-LAN & Shutdown Not Supported

​
4. Troubleshooting

ProblemSolution
Block Remote Control, Turn Off Display, Shutdown Commands Not WorkingEnsure SICP over Network is enabled and hosted on port 5000.
Viewer does not start in full screenCheck firmware version and update if necessary.
Device fails to connect over EthernetUpdating the firmware may resolve this issue.
Navigation bar remains visibleFirmware update required.
Viewer repeatedly asks for content storage permissionCheck if correct firmware version is installed.